
產品簡介
                科迪儀器SSM-II浮法玻璃應力測試儀測量精度高,結構新穎,使用簡單,攜帶方便。符合標準GB 15763.2建筑安全玻璃第少部分鋼化玻璃和GB/T18144玻璃應力試驗方法的要求。
相關文章
科迪儀器SSM-II浮法玻璃應力測試儀
簡介:  
該設備使用于半鋼化玻璃、鋼化玻璃、化學鋼化玻璃的表面應力的定量測量。該儀器測量精度高,結構新穎,使用簡單,攜帶方便。符合標準GB 15763.2建筑安全玻璃第少部分鋼化玻璃和GB/T18144玻璃應力試驗方法的要求,儀器如下圖所示。
性能特點:應用廣泛,適用于半鋼化玻璃、鋼化玻璃、化學鋼化玻璃的表面應力的定量測量。
輕巧實用:儀器重量約1.2公斤,體積15.20.4厘米,將儀器置于浮法玻璃的浸錫面或化學鋼化玻璃的表面上,調節儀器的光路,即可測量。
計算方便:儀器目鏡視場中的臺階高度乘以儀器常數,即可得到玻璃的表面應力值。

該儀器采用光波導效應原理,光學系統結構設計獨到,成像效果良好,其誤差不超過  3.6Mpa,主要性能達到了國際同類產品的要求。
    Surface stress meter   
    for thermal or chemical tempered glass(SSM-II)  
    1. Application   
    The instrument is applicable to non-destructively determine surface stress of the heat-strenthened or tempered float flat glass, and can also be used to measure the surface stress of the chemically ion-exchanged glass.   
    2. Technical data   
    a. Contact oil: Clove oil with index of refraction at 25℃=1.54   
    b. Magnification of micrometer eyepiece: 15×   
    c. Min. degree scale of micrometer eyepiece: 0.01mm.   
    d. Power supply: Input voltage AC 220V, 50HZ   
       Ouput DC 3V  
科迪儀器SSM-II浮法玻璃應力測試儀,該儀器攜帶方便、結構新穎、使用簡單,在汽車、建筑安全玻璃生產廠家、科研院所、檢測中心及建筑工程上得到了廣泛的應用。